Combined, the protective features of SOK batteries allow for storage usage temperatures from -22°F to 140°F. While you can only charge them at temperatures above freezing, the ability to store and use them below 32°F is crucial for winter applications. When in storage, SOK batteries lose approximately 3% of their charge each month. Lifecycle Rating & Warranty Absolutely! With no acid or venting, this battery can be installed in any configuration except for upside-down (terminals facing down). Who makes the SOK BMS? With over a decade of daily energy storage, SOK batteries are a great investment for an off-grid DIY solar power system. Plus, a seven-year standard warranty helps guarantee the initial risk of purchasing a battery for several hundred dollars. Cons of SOK Batteries IMPORTANT NOTE: both of these 12V batteries have the SAME max charge and max discharge limits. Those amp limits double with two batteries in parallel. However, I see a lot of folks assuming a single 206Ah battery is equivalent to two 100Ah. That is not the case. To power a typical 2000W inverter, you need at least two of these batteries, either two 100Ah or two 206Ah. The 206Ah gives you twice the storage capacity, but not twice the amp delivery rate. Storage capacity is still an important feature. I bought two of the 206Ah batteries to help ease recharge anxiety. So far, I like them a lot.

SOK 100Ah 12V LiFePO4 Deep Cycle Battery | SOK Battery SOK 100Ah 12V LiFePO4 Deep Cycle Battery | SOK Battery

Keep updated on Coupon by following Sok Battery on social media. This is a great convenient for people who are keen on using social media accounts.

Can I get my battery shipped to me faster?

A reasonable value for the "tail current" would be 0.05C (where C is cell capacity - Ah). So if you have 100Ah cells, set the tail current to 5A (in the MPPT charger; Multiplus does not have a "Tail current" setting).

Batteries | Current Connected Batteries | Current Connected

The BMS is custom made by SOK battery, designed by SOK’s in-house engineers and manufactured to their strict quality control standards. If you can, we recommend setting the equalization voltage to 14.6V. With this set at 14.6, if an equalization is somehow triggered, you will not damage your battery. Victron Settings For SmartShunt & BMV-712 / SOK Battery Choose the SOK 12V 100Ah Lithium-Iron Phosphate Deep Cycle Battery for reliable power, exceptional durability, and a range of intelligent features. Whether it’s for your RV, van life, off-grid cabin, or other applications, trust the SOK battery to deliver outstanding performance and value! Extended Cycle Life: The SK48V100 offers impressive longevity and reliability with high-capacity cells that retain 80% capacity after 4000 cycles. That is even at a 100% Depth of Discharge (DOD) with a 1C rate. Equalize Charging Voltage shut off or 14.4 V - maybe the voltage at which the cell ballancing stops

Author

Yes, however you will need to manually set the appropriate settings within the inverter manually, and run these batteries in an open-loop, voltage control based configuration. Li Time 12V batteries have incredible surge capacity with their own dedicated BMS. Their trolling motor battery has a better surge than anything I have tested!

SOK Battery 206ah 12V Deep Cycle Lithium Solar Battery SOK Battery 206ah 12V Deep Cycle Lithium Solar Battery

Battery Starts Synchronized: Disabled (NOTE: you will need to fully charge your battery to sync up SOC%) State of Charge: 30% (NOTE: Set this to 30% with brand new, untouched batteries. They ship at 30% SOC%.) I have tested a lot of batteries, and this one blows away the competition. If you want a budget battery that will not give you any problems, this is the way to go! Product that was used for applications other than which it was designed and intended for, including repeated engine startingYou can set this "Absorption" voltage in the 3.4V - 3.6V range (depending on if you have or not a BMS and what kind of BMS). So for a 4-cell battery, set "Absorption" voltage in 13.6V-14.4V range.