Mark the centreline of a test piece of the material to be used and set the cutter so that this line comes just below the protruding tongue. All Evolution Mitre Saws have can be connected to powered dust extraction systems to help keep your workspace clean. For larger boards, a length of batten clamped across the board and running on the top of the fence helps, especially if used in conjunction with horizontal featherboards.

The most common type of mitre box is 3-sided which is open at the top and at both ends to allow the material to be placed inside and lined up with the guides before making the cut. To make the cuts easier, set cutter and fence to their precise positions, using your setting pieces, and clamp two stops to the table top tight behind the fence.Our S355CPS is the industry standard metal cutting Chop Saw and used by welders, machinists and fabricators all over the world. It is particularly good with heavily figured wood where the grain pattern is carried round the corners, and for veneered boards such as oak-faced plywood or maple-faced MDF. With the flat cuts you can use a push block with built-in breakout protection (as described in Quick Tips). During assembly, It is highly recommended to reinforce the union of the structural pieces with a little PVA glue to achieve a lifetime of use. Proper Use: Use it only for its intended purpose, which is to be able to cut small profiles and strips made of soft materials.

Precision Multiangle mitre cutter tool for small profiles and strips made of ABS plastic, Styrene, uPVC, Wood, and other soft materials. The best Evolution saw blades for cutting Laminate flooring are either the Fine Wood blades or the Thin Steel blades. If you are going to be moving your Mitre Saw around, using it on-site, and taking it with you to various job locations then a Mitre Saw Stand will be incredibly helpful. Evolution has a service centre at our UK Head office and we can help keep your power tools running faultlessly for years and years.

All Evolution corded and cordless Mitre Saws can cut metal as well as wood, plastic and composites straight out of the box with our Multi-material blade. If you want the best cuts, most accurate gap-free joints and easy installation then a Mitre Saw is the best tool for the job. This is especially useful when fitting skirting boards, coving and dado rails, as these can be sawn to the exact angles required by the installation. Using a long lever with a rack and pinion mechanism, it enables you to trim off fine shavings for the most precise fit. Axminster Tool Centre Ltd trading as Axminster Tools is a credit broker and is Authorised and Regulated by the Financial Conduct Authority.