Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). The installation on the Skywatcher HEQ5 is done by replacing the original upper flange with a new flange ( supplied with the terminal ) that enables the installation of the Vixen Losmandy - large. Features two countersunk screw holes spaced 35mm centre-to-centre and a central 1/4" photo tripod thread for mounting to standard tripods. This is a cheaper and much quicker alternative, and you can easily put dovetail slots in any wooden surface you need to clamp to.

The Observatory dovetail clamp Vixen+Losmandy PLUS is designed to support heavy telescopes that come with Vixen or Losmandy style dovetail bar.If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag.

I was going to route out channels, and put in T-track, but that’s loads of work, and T-track is expensive. The Maxi dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance), or to install it on the mounts instead of the original.Despite its strong 595 lb clamping force, the No-Mar clamp pad ensures a firm grip without causing any damage to your materials. To the eye they look very very similar, but when you attempt to insert the Matchfit clamp into the underside of the Festool track, it goes in partially (almost to the shoulder) and then stops. Does exactly what I needed - sticking a small dob onto a camera tripod for a youngster who's showing real interest in the stars. The Skywatcher HEQ5 mount has only a Vixen type fitting, but thanks to our Losmandy and Vixen dovetail clamp, the user will be able to use both of them.

I saw a video where someone tested the pressure needed to pull the clamp through, mdf failed, but ply and hardwood was good. The big dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance), or give the possibility to assemble the Losmandy. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. This game-changing tool, designed with Anti-Pivot Spring technology, powerful hold-down pressure, and a robust quick-action ratchet mechanism, transforms your workspace, offering an innovative, tailor-made clamping solution that broadens project possibilities while ensuring a firm, non-damaging grip. Hardware Pack you can create a variety of sleds, jigs and fixtures with hold downs and stops that can move freely and lock down where needed anywhere you can.It’s an entire system designed to give you all the functionality of T-track and T-track accessories, at a fraction of the cost. DIY Dovetail Tracks: With the MatchFit system, you can route your dovetail clamp tracks using a dovetail bit. Very flexible and adds function to the working surface, as you’re not restricted to fixed positions.

Versatile Capability: With a 7-inch clamp capacity and a deep 2-1/2-inch throat depth, the MatchFit Ratchet Clamp AP broadens your project possibilities, accommodating various sizes and types of workpieces. Use Dovetail Hardware to make stops and hold-downs that move freely, and tighten down anywhere you can route a groove. Unmatched Precision: With the innovative Anti-Pivot Spring technology, the MatchFit Ratchet Clamp AP keeps the clamp arm firmly in place, eliminating unintentional movement and boosting speed in every project.

Micro Jig's MATCHFIT 1" Dovetail Track Hardware allows you to create a variety of sleds, jigs and fixtures with hold-downs and stops that can move freely and lock down where needed, anywhere you can. Our dovetail clamp, therefore suitable to medium loads, it's made from a full aluminum block T6061 and red anodized to resist weathering.