Importantly for long-term protection Hydrate-80 doesn’t contain chlorine which is known to transform into corrosive hydrochloric acid in rust converter applications causing under-film blistering and destruction of paint finishes or other coating products. Wash hands with soap and water after contact and in case of contact with eyes wash with plenty of running water and seek medical attention. hydrate 80 has been used to arrest and prevent corrosion in diverse applications - from massive marine installations to classic and historic vehicle restoration hydrate 80 provides dependable long-term protection.

Bilt Hamber hydrate 80 provides powerful protection to rusted steel surfaces, its electrochemical function stabilises existing corrosion by converting the iron oxides into a protective metal complex, it also combines with surface moisture and oxygen depriving the corrosion process of the conditions it requires. Importantly for long-term protection Bilt Hamber Hydrate 80 doesn’t contain chlorine which is known to transform into corrosive hydrochloric acid in rust converter applications causing under-film blistering and destruction of paint finishes or other coating products. Oh, and the little black socks on the feet are just 4 layers of some rubbery heat shrink I put on there so the thing won't scratch up the laminate flooring when it's done.If I paint it onto bare metal, but panels you can see, can fillers and paint to over the top of it trouble free?

That thing should kick out double the heat of this one, but the lids significantly further away from the flame. It's a thick lump of metal, but it was there most of the day, so I'm assuming it's got to be sub 300'C? Importantly for long-term protection Hydrate 80 doesnt contain chlorine which is known to transform into corrosive hydrochloric acid in rust converter applications causing under-film blistering and destruction of paint finishes or other coating products.If you are talking about filling small pitted rust marks you might find that epoxy, then a coat of high build primer is sufficient. Hydrate 80 leaves a (thick) coating on the surface, yes it's meant to convert rust but then seal the surface to prevent further corrosion.