We cannot cancel your purchase when: • The seal is broken on any software in the case of a simulator. Once the gravel is evenly coated, decant the gravel to the desired area and begin smoothing slightly with a plastering trowel to achieve an even finish. As a result of its smooth textured finish, the resin bound gravel floor is ideal for use with wheelchairs, and the permeable qualities help reduce water build-up. and 1x5 Litre Jerry can covers 6-8m² using Pour On Method per coat, ensuring your stones are evenly coated. Forced Action Mixers Ideal for mixing a huge range of materials including resin bound gravel, plaster, lime render, concrete, soils, animal feeds and more.

Resin bound paving fixes together small stones with high-tech resin to form a firm, attractive surface. Many homeowners choose to have the bonded gravel design installed for driveways where the surface is on a slope.Non-specialist installers may use substandard materials that degrade or discolour in sunlight over time. You will need our Static Grass Layering Spray to build up the next stage of grass without flattening the grass you just laid. that are likely to experience regular foot traffic should be installed using only the hand mix and trowel method to achieve the best results. Aim for full and completely cover, with every square millimetre of the gravel doused with the EasiHold. These are likely to receive regular foot traffic the hand mix and trowel method will achieve the best results.

Easihold coats the stones in a thin film, and leaves the stones capable of being penetrated by water as normal. The resin bonded stone design is not ideal for schools or any areas which are predominantly used by children due to the abrasive qualities of the surface which could cause an injury if a child fell over.If you’re using existing stones, try to remove any dirt or debris prior to application, and leave them to dry before applying Easihold. There is still a lot of work to do with this new site, so please bear with me while I get images updated and the new content coralled into the right place. per coat and 1x5 litre Jerry can cover 12-14m² using Spray On Method per coat when applying by the Pour On or Spray On method for the strongest finish. This product can be applied to the surface using a brush or airbrush and drying can be accelerated using a hairdryer.