Salmue Cotton Bed Canopy+Steel Ring+Hooks +Hook Base Plates +Adhesive Tapes+Screws Block Out Light Dome Princess Mosquito Net Equip With Assembly Tools(Khaki)

Product Information

The height will depend on your needs, often at the same height as an existing banister rail. This is usually between 900-1000mm above the pitch line of the stairs.

THIS BED LEVER FITS ALL TYPES OF SLATTED DIVAN ADJUSTABLE BEDS FROM ALL COMPANIES AND 95% OF ALL OTHER LAYBROOK ADJUSTABLE BEDS, ALL LAYBROOK WOODEN ADJUSTABLE BED (NEEDS A DIFFERENT BOTTOM PLATE), ALL LAYBROOK LEATHER ADJUSTABLE BEDS. The lower portion is usually set horizontally and acts as a forearm support. This enables the user's body weight to be distributed through his or her forearm which may be helpful for someone with painful hands or wrists. They are fixed to the wall or to the floor behind the toilet and can fold down to a horizontal position alongside the toilet. Floor to ceiling railsare vertical rails which are attached to both the floor and the ceiling. They can be held at any point up the bar for general support and can be useful in the process of standing up/sitting down. The Arena adjustable bed grab rail, handle, ring or bed lever (depending on what you call it) comeswith anti entrapment andwas designed by Laybrook especially for domesticelectric adjustable beds. The Arena grab ring is attached to the side of the surround so it stays static when you change position on your bed, this makes it easy to use when getting in and out of bed, helps you turn whilst laying in bed, supports you when getting up out of the bed whilst sitting on the edge of the bed. Withother grab rings, when the head section of your bed elevates to the upright position the grab ring moves with the bed and impedes you from getting in & out of the bed.

The Arena adjustable bed grab rail, handle, ring or bed lever (depending on what you call it) has not got a triping hazard like the parnell premier grab rail, it also comes with anti entrapment and was designed by Laybrook especially for domestic electric adjustable beds. The Arena grab ring is attached to the side of the surround so it stays static when you change position on your bed, this makes it easy to use when getting in and out of bed, helps you turn whilst laying in bed, supports you when getting up out of the bed whilst sitting on the edge. With other grab rings, when the head section of your bed elevates to the upright position the grab ring moves with the bed and impedes you from getting in & out of the bed. Next consider your ability to grip onto a grab rail. Do you have reasonable hand strength? Do you ever have pain in your hands, wrists, elbows or shoulders which would prevent you from pulling up or pushing down on a grab rail? What is your overall balance and ability to stand like? Some hinged wall-mounted rails can be supplied with a support leg which rests down on the floor when the rail is horizontal, transferring some of the load from the wall to the floor. An epoxy, paint or plastic finish provides a warmer feel to rails, is hard wearing and will reduce the effects of condensation. A choice of colour allows for a colour contrast with the wall for users with low vision or for co-ordination of bathroom accessories.

sitting down or standing up from the toilet, or standing to manage your clothes when using a toilet Cranked or offset rails are wall-fixed rails which have been designed to fit to frames and spaces to allow the user to step up to and through a doorway or space without releasing grip on the rail. A wide range of finished hand rails are available from DIY chains for you to choose from. A plain 50mm mop head cross section softwood rail may be used. A vertical rail at least 500mm long can be fixed at the entrance to the shower compartment for use when stepping in and out of the cubicle. The rail should be mounted at a height that the user can comfortably reach whilst stood both from outside the cubicle and from in the cubicle.Consider your daily routine. What movements are you making or what activities are you doing when you feel that additional support, or something to hold on to, would give you extra safety? For example: Toilet frames are designed to provide horizontal support for pushing up from a toilet, or for steadying the body when lowering onto a toilet. The frame, which stands over the top of the toilet, can either be free standing or fixed to the floor. These provide a horizontal bar in their lowered position. They should be fitted at waist/elbow level and approximately a fist width away from your thigh when sat on the toilet. If you are very unstable when standing and you find it difficult to bear your own weight, simple grab rails may not be the most suitable answer for you. You may need more support to help you. Likewise, if you have very poor grip, or significant pain in your hands, arms or shoulders. Horizontal rails may help when pushing up from sitting and provide support when lowering, e.g. on to a toilet. Most people find it easier to push down on a rail rather than pull on one, so horizontal rails are more commonly used.

The horizontal rail can be used in combination with a bath board. The user may benefit from holding the rail while they sit on the board, then turn and lift their legs in and out of the bath Fixing to UPVC plastic door frames should be avoided as the frames are unlikely to have the necessary internal materials in the required area to support a grab rail's fixings. When stood in the bath - A rail (at least 500mm long) can be fixed vertically on the wall, 600mm from the tap end of the bath (dimension b in above diagram), with its lower end 200mm above the bath rim (COT 2006 p13, H M Government 2015, p58, diagram 26). This is most likely to be of use when stood in the bath (perhaps whilst showering) or when standing from a bathboard over the bath. Part of the rail can be fixed at an angle of 13° upwards towards the head end of the bath to provide an inclined support. The finish of the rails may be important from an aesthetic point of view and also for the grip surface it provides.

Choose Your Adjustable Bed By Size

GRAB RING SHORT FITS ALL DIVAN ADJUSTABLE BEDS WITH A SIDE PANEL OF 6-8 INCHES ((NORMALLY A BED ON LEGS) THIS IS THE SIDE PANEL OF THE BED THAT THE GRAB RING WILL FIT TO)). Staircases usually have a handrail on one side, although this may not extend to the full length of the staircase. Most DIY stores sell handrails which can be used to extend the existing handrail all the way up the staircase if it is required. Adding a handrail to the other side of the staircase will provide more support where needed. Long lengths of rail are available and may also be installed along corridors. A high contrast finish may be helpful if you have low vision - choose grab rails in a colour that contrasts with the wall it is to be installed on. This should be a flat, unknotted piece of wood, which is screwed into the vertical joining pieces of the partitions. The grab rails can then be attached to the board. The College of Occupational Therapists recommends a 144mm x 19mm board/pattress with its external corners well rounded and the board itself fixed to the wall at least every 900mm (COT 2006). Consider the advice about the different kinds of grab rails. Identify the best types of rail for your particular requirements.