Once assistance has been provided, the Alarm call is cancelled from inside the WC by pressing the ‘RESET’ button on the NC809DBBT Reset Point c/w Sounder Attractively designed, easy to install and simple to use, our disabled persons toilet alarms allows a distressed person to raise an alarm in the event of an emergency. To operate, the user simply pulls the cord of a ceiling pull unit to activate a light and sounder outside the WC.

Both of the devices that make up this range of equipment are powered by an internal battery. The transmitter unit uses a 9V alkaline type battery, whereas the sounder beacon receiver uses a 3.6V AA lithium battery as a power source. This means that there is no need to provide a mains power supply to this system. This saves time and costs in the installation of the system. The system monitors the batteries to ensure there is enough power in them to maintain an operational system. When the battery levels are getting low the receiver unit will beep to indicate that the batteries require changing. DDA Wireless Disabled Toilet Alarm System Once an alarm has been activated by pulling the cord two things happen; the external indicator alerts staff to the situation and the reset button situated within the room beeps continuously until it is reset. The beeping from the reset unit both indicates that the alarm has been successfully triggered and reassures the disabled person that assistance will be with them very soon. The red Alarm LEDs and sounder on the NC806CS Overdoor Light c/w Sounder and the red ‘CALLING’ LED and Sounder on the NC943B Call Controller activate steady to let staff know someone is in need of assistance. For applications requiring more than one point of call (e.g. at the WC and the wash basin), up to 3 ceiling/wall pulls can be daisychained together.The red reassurance LED and sounder on the NC809DBBT Reset Point c/w Sounder activate intermittently (approx 1 second on, 5 seconds off) to let the user know help is on the way. It’s also critical that the pull cord for the alarm is located within easy reach and can be immediately identified as a disabled toilet call system, rather than a fire alarm (this also means that the sound has to be different to that of a fire alarm). It’s vital to ensure that any disabled call alarm system you install in a disabled toilet complies with BS 8300:2009. We are pleased to introduce our range of Honeywell emergency call alarms. These are ideal for small installations and are extremely easy to install. C-Tec Disabled Toilet Alarm Kits

The member of staff responding to the Alarm call presses the ‘Call Accept’ button on the Call Controller. Also, as well as sounding, the alarm should also have a light on it, to show the operator that the alarm has been successfully activated. A light coming on is essential for those who are deaf and additionally, the alarm must sound for those who are visually impaired, so that they can be sure that the alarm has indeed been triggered. The reset button should be suitably located, so that it can be reached by anyone using a wheelchair. Disabled toilet alarms should be installed in any disabled WC in line with BS 8300 and the Equality Act 2010. Providing a reliable and effective means of raising an alarm is essential to allow disabled people on your premises to carry out their daily lives with confidence. All of our disable WC alarms are manufactured in accordance with the latest directives and are compliant with building regulations.

Boxing Clever

NC807C & NC809DBBT have red Reassurance LEDs; NC806CS has twin red Alarm LEDs. NC943B has a red Alarm and green Supply Present LED; NC943B has a link-selectable Call Accept/Reset button; NC807C has a pull cord with two bangles to generate a call; NC809DBBT has a Reset button.