Shelly Motion - disponibile da Aprile 2021 Wireless White

Product Information

If the cloud isn’t enough and you would like to have strict LAN control, using a web interface allows you to play with REST MQTT and CoAP. It looks like Shelly Motion remains present in the Cloud while MQTT is enabled, so this is a big step up from Shelly 1. The default control protocol is Shelly Cloud plus REST API which triggers HTTP tasks. I remember this function on Shelly 1, but now you can make multiple API calls per trigger. It’s a great option to keep the device compatible with Shelly Cloud (and therefore with Alexa and Google Home) and be able to trigger Home Assistant or NodeRED. It means that you could send information about the movement to several devices at once instead of processing it on another server. Shelly Motion2 doesn’t have a humidity sensor on board. For that, you will have to get their dedicated Shelly T&H Sensor instead. Apart from bathrooms and perhaps the kitchen, I’d be absolutely ok without that metric. Temperature is most important to me. Shelly Motion 2 (the Device) is a high-sensitivity, ultra-low power consumption Wi-Fi motion sensor, which also features light and temperature metering. The built-in light and temperature sensors provide additional opportunities for home or office automation. Shelly Motion 2 also has an integrated accelerometer for tamper protection and features vibration detection. The built-in 6500 mAh rechargeable Li-ion battery allows the Device to stay connected to the Internet in standby mode for up to 3 years, and in active transmission (approx. 6 hours/day motion detection) estimated between 12 and 18 months without recharging. Shelly Motion 2 (the Device) is a high-sensitivity, ultra-low power consumption Wi-Fi motion sensor, which also features light and temperature metering. The built-in light and temperature sensors provide additional opportunities for home or office automation. Shelly Motion 2 also has an integrated accelerometer for tamper protection and features vibration detection. The built-in 6500 mAh rechargeable Li-ion battery allows the Device to stay connected to the Internet in standby mode for up to 3 years, and in active transmission (approx. 6 hours/day motion detection) estimated between 12 and 18 months without recharging. Main applications

IMPORTANT! Direct sun light or close heating sources can trigger false motion detection. LED Indication Signals This document contains important technical and safety information about the device, its safety use and installation. Change the current device name. This will reflect on the Shelly Device name in the application if the “Sync name” application setting is enabled. Factory ResetSet the blind time of the motion sensor in minutes (from 1 to 1440) after the last detected motion. Here are a few more sensors i made using this method. But in this case these yaml example are placed under the sensor section in your HA config not the binary_sensor section like the example above. sensor:... But neither the battery nor the new design is the most impressive new thing here. At least for me the most impressive new feature in Shelly Motion 2 is the embedded temperature sensor that immediately provides more opportunities for home automations. So, if you buy the Shelly Motion 2 Sensor you actually getting 4 useful sensors. Which are: Observe the room temperature chart at the bottom of this tab, which display the temperatures measured in the last 24 hours. Below the temperature chart, observe whether or not motion has been detected by the Shelly Device. Adjustable sensitivity - with 256 levels of sensitivity adjustment based on distance and type of movement to which the sensor reacts

Acting as a tamper alarm and potential warning system for earthquakes, the vibration sensor displays extra info in your app when the shakes are detected. Sadly it’s a binary notification, so you won’t receive the information about the strength of the motion, but you can calibrate this in the settings to fit your needs. It’s pretty sensitive at low settings, and I could imagine this can be activated by passing lorries outside if your walls are prone to movement like this. With a bit of trial and error, you could use this to create an earthquake alarm, in case you sleep as deep as me. Shelly app

Smart Scheduling

If you can’t find the CoIoT peer settings in the device’s web panel, it’s probably using an ancient firmware version, and you should update it to the current one. Generation 1 “Shelly 4Pro” and “Shelly Sense” are not supported (devices based on old CoAP v1 protocol) Shelly® devices can be accessed, controlled and monitored remotely from any place where the User has internet connectivity, as long as the devices are connected to a Wi-Fi router and the Internet.

The LED indicator behind the motion sensor lens ( C) will start flashing in red, green and blue sequentially for a while and then turn steady blue. The Device is now in AP (access point mode). The red charging indicator above to the charging port will be on while the Device is charging. The indicator will go off when the battery is fully charged. If you think your Shelly devices are working correctly and don’t want to change your network/configuration, you can ignore the repair issue. Still, you must know you are giving up the best experience of using first-generation Shelly devices with Home Assistant.IMPORTANT: If the motion sensor detects movement while the Device is in AP mode the LED indication will briefly change to cyan.

If the BUTTON TYPE of the switch connected to the device is set to momentary or detached switch, the integration creates an event entity for this switch. You can use this entity in your automations. Event entities (generation 2) What I really like about Shelly Motion2 is the fact that it comes with Shelly Cloud and a web interface. It means you get to choose how you take advantage of the sensor. In the typical scenario, where the sensor is connected to Shelly Cloud, you can interact with it via the app, connect it to Alexa and Google Home via relevant skills and use it as a trigger for motion, temperature range, vibration and light.

The integration uses the following strategy to name its entities if the device has more than one relay: Just like the original sensor, Shelly Motion2 is a WiFi-enabled sensor that links with a 2.4GHz network (or creates its own AP point for situations where wireless LAN isn’t possible). Shelly Motion 2 (left) vs Shelly Motion Do you remember Shelly? You should, as they have nifty devices for home automation. I was in love with their web GUI on Shelly 1 ( review) and their funky-looking Shelly Eye camera ( review) and now, Shelly is exploring another market: sensors with Shelly Motion. And there are lots to talk about.