Featuring innovations like Humanscale’s patented Weight-Compensating Spring Technology and Smart Stop functionality, M10 enables the personalisation and flexibility needed for today’s evolving workplaces. The Huanuo HNDS12, like the HNDS6 (below), is a bit fiddly to set up. It has two clamps that need to be adjusted and roughly a dozen screws that need to be installed. The gas springs also require a bit of adjustment to reduce the force provide, at least when used with a 24-inch or 27-inch monitor.

Support for multiple monitor sizes: Because 27-inch monitors have become so common— they don’t cost much more than smaller displays—we considered only monitor arms that could handle a screen at least that size. All the models we tested can work with smaller displays, and a few can even hold larger displays, up to 34 inches. Featuring innovations like Humanscale’s patented Weight-Compensating Spring Technology and Smart Stop functionality, M10 enables the personalization and flexibility needed for today’s evolving workplaces. Want a monitor arm that gets the job done and looks good doing it? The Herman Miller Flo is for you. The monitors range of adjustment is a bit limited compared to the LX. It offers 11.5 inches of height, 75 degrees of tilt, 180 degrees of swivel, and 360 degrees of rotation. However, a somewhat more limited height adjustment is typical in this category due to the size of monitors these stands are expected to carry. Long warranty: Monitor arm technology isn’t something that will change radically and warrant a replacement every year or two. Instead, you should expect a monitor arm to last many years and adapt to changes such as a new desk or display. It’s furniture. Because of that, we looked at warranty length and customer support to see which companies would stand behind their models and the arms’ expected years of performance while holding up an expensive monitor (or two). Note that monitor arm warranties don’t include damage to the monitor itself.

Available to Purchase Online

Monitor size is one exception: While the standard LX is rated for monitors up to 34 inches, the Side-by-Side’s arm is only rated for monitors up to 27 inches. The monitor arms aren’t long enough to fit two 32-inch or 34-inch monitors side-by-side. Vertical arrangements are also supported, though only if one of the two monitors is small (less than 23 inches diagonal). Surprisingly, the Flo has a listed weight limit of 20 pounds and recommends use with monitors weighing at least 7 pounds. Most monitors fit within this range, but some heavier models won’t be compatible with the Flo.

Smoothness of motion: We preferred monitor arms that were firm enough to stay put while we worked but could reposition easily and didn’t require too much force. The monitor’s range of adjustment isn’t much different from other high-end monitor arms. It offers 13.3 inches of vertical adjustment, 80 degrees of tilt, and 360 degrees of swivel and rotation. That’s essentially identical to the less expensive Ergotron LX. The Flo’s operation is smoother, however: I found I could adjust a monitor’s height with a mere nudge. In many ways, a keyboard support is the heart of an ergonomic workstation. As reach and vision drive posture, our keyboard tray allows the user to sit in a healthy, neutral posture through bringing the keyboard and mouse to the user in an ergonomic position. There’s one unusual feature: a USB hub. This includes two USB ports that are placed at the front of the arm base. Each of these will need to plug in to your computer, which might be a problem if you have a laptop with just a few ports, but it’s a functional bonus. In today’s fast-paced, agile work environment, there’s no time for discomfort. M2.1, part of Humanscale’s revolutionary new monitor arm line, instantly improves the comfort, health and productivity of any workspace. Fully compatible with traditional desks and sit/stand workstations alike, M2.1 meets a variety of configuration needs for lighter monitors up to 15.5 lbs.A standout feature of this microphone suspension boom arm is its ability to rotate 360 degrees. This is particularly useful in those moments when you get a sudden inspiration to record. You can instantly manipulate the position and angle to suit your needs. In today’s fast-paced, agile work environment, there’s no time for discomfort. M10, part of Humanscale’s revolutionary new monitor arm line, instantly improves the comfort, health and productivity of any workspace. Built to hold heavier equipment, it's optional strong triple crossbar allows M10 to hold up to three monitors or 21.8 kg (48 lbs.) – all while maintaining a simple and sleek design. We’ve all been in a situation where a recording studio or room is littered by cables, trying to figure out which ones are attached to certain microphones or instruments. Thankfully, a lot of desktop stands are pre-fitted with XLR cables. The cable is internally threaded through the stand, which allows you to simply plug in and record. This capability saves a lot of time and clutter and is featured on a select few microphone suspension arms. Final Verdict Instead of using a gas cylinder to counterbalance the weight of the monitor, the M2 monitor arm uses extension spring technology. Without clunky mechanisms to complicate the design, the M2 offers uncompromising lightweight, long-term durability and an ultra-thin design that complements flat-panel monitors and attachments for a truly flexible workstation. Humanscale M8 Monitor Arm