Tried and tested– Combiphos is a polyphosphate compound specifically developed to provide the most effective limescale prevention in flow-through installations. Polyphophate dosing has been safely used to treat water throughout the world for many years. Yes. Replacing the Combiphos is easy if the procedure is correctly followed or refer to the owner’s manual supplied with the Combimate unit.

Eco-friendly: The Cistermiser Combiphos Refill is eco-friendly and does not contain any harmful chemicals that could harm the environment Health and safety– Combiphos is tasteless and odourless and contains a polyphosphate compound which is classified by the WHO as a ‘food-grade’ additive. The quantity, size and hardness of the spheres control the amount of Combiphos released. Typically this is less than 3 ppm (parts per million) of phosphate in treated water and perfectly safe for human consumption. Combimate requires very little space (roughly about the size of a teapot) and can be installed virtually anywhere on a home’s cold water supply pipework on either 15mm or 22mm pipework. Installation of the Combimate has been carried out in accordance with the manufacturer’s instructions. Boilers, shower head & screens, thermostatic valves, immersions, pipework, washing machines, taps and even electric kettles. What is Limescale?Note: Combiphos does not soften water and its effectiveness may be reduced in water heated to temperatures above 60 degrees, in water with carbonate hardness levels above 360 ppm or at pH levels below 6.5. This action prevents scale formation while retaining the health benefits of the natural minerals contained in hard water. Yes. If the Combimate is located in a warm environment (e.g an airing cupboard) or near a heat source, the Combiphos crystals will dissolve at a faster rate. Ideally Combimate should be installed at room temperature with a cold water supply, located at least 450mm from any appliance or local heat source to prevent water in the dome from warming and accelerating the dissolution of the Combiphos.

Combimate does not use magnets or any electricity in its anti limescaleoperation and is both easy to install with minimal maintenance. Easy to install: The refill is easy to install, and it comes with clear instructions to help you get startedThis reinforces our statement of Sustainability without Compromise, ensuring that we practice what we preach whilst consistently providing our customers with fantastic service. Limescale doesn’t just form on taps and shower heads. Limescale can form on any surface where water is heated, including the internal surfaces of pipework and boilers. Below is a list of places where your home is vulnerable to the damaging effects of limescale formation: Kitchen Mixer Taps Pull-Out Kitchen Taps Low Pressure Kitchen Taps Filtered Water Taps Boiling Water Kitchen Taps Cold Water Kitchen Taps Filters & Accessories

Combimate is an inline scale inhibitor and can be fitted to the majority of pipework configurations.

Independent Product Reviews

Combiphos also coats the inside of the pipework, boiler heat exchanger and appliances with a non-residual, microscopic, protective coating. This again prevents scale-causing minerals from accumulating and aggressive soft water from corroding the system and appliances. Safe to use: The Cistermiser Combiphos Refill is safe to use and does not pose any health risks to users when handled correctly High-quality: Cistermiser is a well-known brand in the water treatment industry, and the Combiphos Refill is made from high-quality materials that are designed to last Combimate is not a water softener but a phosphate dosing device. Combimate does not alter the hardness (or softness) of the home’s water supply but through the process of adding phosphate prevents limescale build up and provides softwater corrosion protection