Record Power SS16V Scroll Saw 16-inch

Product Information

Working table– You also need to consider the size of your work table. Does it provide enough room to work on a piece comfortably? This is important because you need to be able to spin the workpiece freely and have it completely supported whilst you are cutting. In addition to the size, you should make certain that the material and surface of your work table is extremely smooth so as not to create resistance when trying to work and move a workpiece. Still, the table should be sufficiently solid to hold the material you are cutting. Try to avoid a wooden table and go for steel or aluminium. Also, you won’t mind its polished aluminium table, which helps you to achieve the best result. It is compactly designed for easy and space-saving storage. Its lightweight is an advantage, making it possible for you to manoeuvre it with ease. There is a dust blower that ensures that your work is clean for proper monitoring.

When you first start out working on DIY woodwork projects, you probably won’t need to worry about having all of those, but one very handy piece of kit is a scroll saw. Can cut a wide variety of materials such as wood, plastic, rubber, leather and non-ferrous materials. You will like its steel and cast iron construction, which guarantees the perfect elimination of vibration. That is why you can use this powerful tool at home and for light industrial purposes. You can use it for saw blades with or without pins. There is a work light that accompanies this machine, making it easier for you to work in poorly-lit areas. After reviewing a great number of different scroll saws, we can easily say that most of the models are suitable for crafting intricate things. Yet, a challenge is possible if one needs to carve in wood or metal fixed firm to some surface. For this purpose, using a scroll saw with a base wouldn't be appropriate. What you could do, though, is to get this Dremel MS20-1/5 scroll saw and benefit of handheld and stationary cutting capabilities. A 45 degree tilting table is a desirable feature to have in a scroll saw, and thankfully most models you see these days have one. Tilting tables can allow you to create more varied pieces of work without the need of tilting and holding the wood at an angle. Table size

You may also like…

To make a scroll saw blade work at its optimum level, you need to have the tension of the blade set right. A blade that is either too loose or too tight will have different, but equally negative effects. If you’re not experienced at this, I would suggest getting a model that has an easy blade tensioning set up.

What’s more, an adjustable light illuminates the working area, making it easier for you to achieve the best result. The table tilts from 0 to 45 degrees, making it possible for you to cut bevels. This variable speed scroll saw uses both plain end and pin end blades for optimum versatility. If you’re into crafting models or just looking for a portable scroll saw for some light woodwork tasks, this product from Dremel might peak your interest. Having the ability to control the speed of the blade is very important when putting the finer points on a piece of woodwork so this is a feature to look out for. Not all model’s variable speed systems work the same though and some are really not that precise and therefore not that useful. Speed: The majority of products in the market now come with variable speed motors. Hence, they can be used on a wide range of materials and for various purposes. Slow speed is perfect for softwood, plastic and paper. On the other hand, high speed is perfect for hardwood as well as other hard materials. Start Cutting Your Material: Your type of design will determine whether you are going to use a single pass or different blade angles. If you are cutting straight lines and corners alone, you can use a single pass, while cutting circular shapes and curves require more time and careful manoeuvres.The Dremel Moto-Saw MS20-1/5 2-in-1 Compact Scroll Saw is an easy-to-use and compact tool for making intricate cuts in different materials. It comes with a range of different blades that ensures that you can cut a variety of materials; softwood, hardwood, laminate, PVC and soft sheet material. The largest blade is the sturdiest and best for wood. The finest blade is good for metal, however, it will not cut wood precisely because it sheers off at an angle. This fret saw machine boasts of variable speed control for optimum precision when cutting through various materials. It has two functioning modes – stationary and handheld. The stationary mode is usually used for precision work while the handheld mode is perfect for larger workpieces. Reduced vibration is guaranteed, thanks to the hold-down foot feature. The biggest fault I found with this model is that when changing the blades, you need to remove the side panel to reach the bottom clamp. And while this can be done without the use of tools, it is still annoying, not to mention potentially dangerous as this is where the motor shaft can be found spinning. Noise and vibration while idling is at a minimum and even while in operation it is still tolerable, but using an anti-vibration mat is always a good idea with any of these products. Some scroll saws have a foot pedal switch, similar to those found on sewing machines. This switch allows you to kill the power while using two hands to hold the material, simplifying intricate cuts. Many of the best scroll saws in the UK offer this, and one of our shortlisted machines has a foot pedal. Remember that foot pedals create additional clutter when the device isn’t in use.

The hold down clamp is another nice feature that raises the safety level of this scroll saw, and the level of vibration is so low that you don’t really notice it. There is also a dust extractor but for some strange reason it has been designed to blow towards you while you work so you’ll need to wear a mask if using it. A scroll saw is similar to a band saw and jig saw, but gives you far more freedom to cut than both these tools. A coping saw does similar but will take serious effort and time. Unlike, a hand saw or circular saw, the best scrolls saws will give you the ability to cut interesting and intricate shapes, as well as dovetails. Like any power tool, it’s critically important to approach a scroll carefully saw. The blade won’t move, but the machine could — some users report issues with devices creeping across worktops.Vibration issues were reported with some of our shortlisted products, so it’s best to clamp them in place.Foot Switch: This makes it convenient for you to use the machine at all times. You don’t need to remove your hand from work if you need to pause and resume operations. Durability aside, let's talk about convenience features. Like in many other scroll saws, the Clarke CSS16VB is equipped with a built-in dust blower. It will help you keep your working area clean and prevent the dust from getting in your eyes. When using a scroll saw it is important to be able to see what you are doing, and that is why most models have integrated work lights. This one is no different and is mounted on a flexible rod so it is easier to find the right angle to illuminate your work and keep those cuts accurate. When your scroll saw is not in use, always ensure you turn off the system to ensure no accidents arise. You will also want to ensure the system is switched off when carrying out essential maintenance, or if you are carrying out any blade changes or tension adjustments.