Corsair iCUE 5000X RGB Tempered Glass Mid-Tower ATX Smart Case (Four Tempered Glass Panels, Corsair RapidRoute Cable Management System, Three Included 120mm RGB Fans, Smart RGB Lighting) Black

Product Information

As mentioned, I took advantage of the open side radiator mount and vertical cable shroud to run some of the bulkier cables down to the PSU. If you're working with a build with a side radiator (which requires you to remove the vertical shroud), you will have to spend some extra time on getting everything laid out properly. One other thing to note is that the powder coat on some of the steel parts is rather delicate. I scratched a couple of areas with what I don't think was excessive force. When building, take care to keep your finish intact. Inside the main compartment of the case is the motherboard mounting tray and a raised lip, which isn't for cables as you might think (more on this later). There are cutouts all along the motherboard tray to let cables pass through where needed, which helps make for a tidy finished build. through a single hidden channel, with an easy-access hinged door and a roomy 25mm of space behind the This brings us to the next problem: wiring. The metal lip I mentioned earlier wasn't designed for cables to pass through it; instead, it's meant to allow air to pass through from the fans mounted on the right side of the case. The lip is fairly short, though, and it partially hangs over the cable cutouts on the right side of the motherboard. This gets in the way of passing cables through—especially large cables like the 24-pin main motherboard power feed. It also makes connecting cables to right-angle headers on the board more difficult. Naturally, as there are cables passing through right in front of this lip as well, this is going to restrict airflow from the fans. Adding fans can almost double the price of this case if you fill all slots with matching RGB fans to get good cooling results.

Corsair iCUE RGB 5000X review | TechRadar

It seems unfair to call the 5000D the base model, as it’s still brimming with features. It has the classic Obsidian series look to it. With the monolithic front panel design and indirect airflow to help reduce system noise. You still get plenty of tempered glass and durable steel construction here though. There are two 120mm fans, but no RGB hardware on this model. Why launch one PC case when you can launch three! That’s exactly what Corsair is doing today, and they’re coming out swinging with one of the most interesting and advanced cases to date. Now, the 5000 series keeps things surprisingly simple too, as they’re all the same case at their core, and offer pretty much all of the same features. However, you have three variations to choose from, the 5000D, the 5000D Airflow, and the 5000X. Corsair 5000D The CORSAIR iCUE 5000X RGB is a mid-tower ATX case that shows off your PC, and not its cables, behind four stunning tempered glass panels. Easily route major cables through a single channel for clean builds with the CORSAIR RapidRoute cable management system and 25mm of routing depth. A wealth of flexible cooling options let you build your PC your way, including room to mount up to 10x 120mm fans or multiple 360mm radiators, and a motherboard tray with customizable side fan mounts. Three included 120mm SP RGB ELITE fans deliver enhanced cooling and vibrant lighting. Complete with room for four storage drives and a modern front I/O panel including a USB-C port, the 5000X RGB makes for a clean build that keeps its cool.”– Corsair Price and Availability With the drive cage in its starting position in the middle of the case, however, adding a power supply is nearly impossible. For this build, I used SilverStone's fully modular ST75F-PT power supply, and ran into trouble almost immediately. Without moving the cage, I could fit the power supply without any cables attached to it into position, but the space between the PSU and cage was too cramped for me to then add cables to the PSU. Overall though, you can see both the normal and the airflow model have the same core features as each other, as does the next one we will be taking a look at. Key FeaturesMoving on, the I/O for this case is pretty modern, featuring dual USB Type-A 3.0 support plus an additional USB Type-C plug. The audio is an all-in-one solution, which we dislike, but that port should really only be used if you’re in a pinch, as direct motherboard interfaces offer less interference. Flashing lights

5000X RGB Tempered Glass Mid-Tower ATX PC - CORSAIR iCUE 5000X RGB Tempered Glass Mid-Tower ATX PC - CORSAIR

However, I wasn’t happy with this result. It’s a disappointing improvement especially considering the increase in noise levels, so I removed the shroud on the inside. This helped reduce noise by another dB and added more airflow, dropping the temperatures a further 2 degrees – and it’s this configuration that makes most sense. With everything put together and the glass side panels reinstalled, the case looks stunning. It's tinted just enough to show off only what really matters. I ran the PC under load for about 30 minutes with an outside ambient temperature of about 21 degrees Celsius to see how cool it runs. Keep in mind I added a rear exhaust fan (which you should definitely do as well no matter what) and two top exhaust fans. Temperatures inside the case hit 30 degrees Celsius at the motherboard while the system sat idle. The CPU hovered around 35 degrees Celsius while idling. I was wondering if anyone know if it's possible to do a hardware mod/swap were i would buy the 5000X tempered glass rgb version but replace the middle front section made of glass with the perforated one from the 5000D airflow edition. Clean and Cool: The 5000D AIRFLOW makes a stunning, showpiece-worthy PC easy to build, and even easier to High-Airflow Front Panel: An optimized steel front panel delivers massive airflow to your system for maximum

If you want to populate all the fan slots, you’ll be busy for a while as you can fit another three fans on the side, three 120mm spinners at the top (or 2x 140), and another 120mm or 140mm spinner at the rear exhaust. Of course, your AIO will probably take care of the top exhaust, but that still leaves another four fan slots open.

5000d vs 5000x and push pull aio config : r/Corsair - Reddit 5000d vs 5000x and push pull aio config : r/Corsair - Reddit

issue with that many fans, is i’m not sure how many light nodes/commander nodes you will have and how they will sync them. The side panels are both screwed on and a little fidgety to remove, but not exceedingly so. As with the top panel, I'm inclined to believe this is for the best, as it helps to reduce the chance of the panels accidentally falling off on their own. Weirdly, despite being a case built for RGB, this dark tint and lavish quantity of glass make the chassis quite elegant. Just beware, the white version of the case doesn’t have nearly as dark a tint, so you’ll have to get a lot craftier to get the internals in that case to look good. Behind the glass is a steel swing door — completely and easily removable for better building — that hides cabling, SSDs, HDDs, PSU, lighting nodes, and anything else housed behind the motherboard panel. With the panel closed and the glass in place, you'd never know there's anything there. Some might remove the swing door completely if they're particularly proud of their cabling, but others (including myself) will appreciate the relative mess it hides.

Adds additional one- and two-dimensional barcodes to the KYOCERA device (as well as the resident and machine-readable fonts OCR-A, OCR-B)

Corsair iCUE 5000X RGB Tempered Glass Mid-Tower ATX Smart

Also note that that the GPU comes up just over the side intake shroud, meaning long GPUs won’t have any issues here. Cable ManagementThe best aspect of working with this case is that there's an exceptional amount of room around the motherboard tray for getting the board into place. Corsair even left a few inches open above the board to make adding a water cooler easy; there's more vertical clearance than in almost any other chassis of this size I've worked with. Despite adding a bunch of noise (46.8 dB total system noise) the side intake did help reduce the CPU temperature by 2 degrees Celsius and the GPU temperature by about 4 degrees C. The three included RGB fans spin at a minimum speed of about 200 RPM at a 10% PWM signal, but will spin all the way up to 1450 RPM at full speed. This is a nice range, and at higher speeds, they sound like big fans, which is a good thing. They produce a pleasant noise without too much bearing grind or whistle. Acoustic Results The CORSAIR 5000D is a mid-tower ATX case that shows off your PC, and not its cables, with a minimalist solid steel front panel and dedicated ventilation channels. CORSAIR RapidRoute cable management keeps your cables out of sight, but easy to route with 25mm of cable routing depth. A wealth of flexible cooling options let you build your PC your way, including room to mount up to 10x 120mm fans or multiple 360mm radiators, and a motherboard tray with customizable side fan mounts. Two CORSAIR AirGuide fans offer directed airflow to your PC’s hottest components, while room for four storage drives and a modern front I/O panel, including a USB-C port, ensure your PC is ready for this upgrade, and the next.”– Corsair Corsair 5000D Airflow While idling, HWinfo64 measured an exceedingly breezy average of 28C over 8 hours. In Minecraft, the temperature only jumps up to around 40C. It’s not hard to imagine that the mesh coverings and large openings on the front and top greatly aid in these results. It’s safe to say that the case does its job quite well right out of the box, with a relatively cheap air cooler to boot, and the cooling can only get better from there with plenty of room to add fans or radiators.