Ensure that the paving to be jointed is dry and free from loose dirt, oil, debris and grease etc. it is essential the joint widths are a minimum of 5mm wide with a minimum depth of 25mm. deeper joints can be filled with dry sand or other materials to meet the required minimum depth.

Geo Fix Paving Joint Compound (20kg) - Solseal Geo Fix Paving Joint Compound (20kg) - Solseal

Geo-Fix® is supplied ready to use and DOES NOT require any further mixing or addition of any other materials. Application Any residue left on the surface when cured can be simply cleaned off by sweeping with a stiff brush. Material or residue that has been left exposed for more than 30 minutes should NOT be used, as it will be adversely affected. Before applying the compound, wet the paving surface. The paving must be kept wet during application but free from standing water. Not wetting the paving surface will result in temporary staining. Ensure that the areas where you are not working remain wet at all times. I found that this did exactly what I wanted with great results.I was using it to repair old tatty grouting in between grey granite patio slabs.Geo-Fix® All Weather offers huge time saving benefits compared to applying traditional mortar. Better Geo-Fix® Original is ready mixed and can simply be brushed into joints with minimal effort compared to using traditional mortar. The excellent flexural properties of Geo-Fix® All Weather make it an ideal compound for jointing paving elements.

Geo-Fix All Weather | Geo-Fix - FatStack Geo-Fix All Weather | Geo-Fix - FatStack

Geo-Fix All Weather Jointing Compound is a unique, ready to use jointing material that’s suitable to use on all types of paving, which have joints with a minimum of 6 mm width and 25mm depth. Geo-Fix® is ready mixed and can simply be brushed into joints with minimal effort.Easier, faster & better than cement based mortar.

Geo Fix Paving Joint Compound (20kg)

To ensure a perfect joint, press the Geo Fix Paving Joint Compound into the joints with a pointing tool or compact into joints using a vibrating plate. Top up as necessary. After application, brush off excess with a soft brush, taking care not to brush out any Geo-Fix® Original from the treated area. Geo-Fix® Original will harden over a 2-3 hour period subject to temperature.**

Geo-Fix Original Method | Geo-Fix - FatStack Geo-Fix Original Method | Geo-Fix - FatStack

Geo-Fix®Original forms a solid joint that resists weed and plant growth yet is water permeable, allowing water to escape to prevent ponding.Any residue left on the surface when cured can be simply cleaned off by sweeping with a stiff brush. Coverage The figures given below are approximate quantities required at 25mm depth per 20kg of Geofix) Joint width Geo-Fix® Original is easily finished by compacting with a pointing tool saving valuable time compared to traditional wet pointing.