Utilizing advanced photonics, mechanics, electronics, robotics, imaging, spectroscopy, and AI technologies in its design, each system is highly effective in surface treatment and cleaning without using any chemicals or blast media. No use of chemicals. Rust remover chemicals can get the job done, but the health implications on their use outweigh their benefit. Such chemicals are not only harsh and abrasive but also emit intense fumes. You will need to wear protective gear such as a respirator, goggles and rubber gloves before using them. However, laser cleaning does not rely on any chemical application. It is the better choice as it does not put your health at risk. If you need to increase surface adherence or friction to prepare surfaces, you may need laser texturing, a surface treatment similar to laser cleaning. Common industrial applications include preparing surfaces for adhesive bonding, painting and thermal spray coating. Another potential issue is that this tool may not be suitable for all types of rust. For example, if the rust is particularly deep or severe, it may not be possible to remove it completely with this tool alone. In those cases, additional methods may be necessary, which could add to the overall cost and time required to complete the job. My Experience For a given surface area, putting the same energy within a short pulse increases the power. It’s like using the bigger hammer. A pulsed laser beam is more efficient and provides a faster removal speed than a continuous beam. And while short laser pulses clean surfaces faster, they also ensure that the underlying material does not heat up too much. 4. It is Consumable-Free and Environmentally Friendly

Eco-friendly - No chemical pollutants are released during the laser cleaning process, making it one of the most environmentally friendly solutions available today. Laser ablation is not only used for cleaning, it's also widely used for other industrial applications. In Summary turnkey laser cleaning systems provide integrated material handling, optimal laser source and the associated laser process for the desired applications. Cost-saving - With no additional chemicals or blast media required, ASP's Laser process helps to save on costs associated with traditional cleaning methods.A simple way to grasp the importance of the ablation threshold is to compare it to throwing a ball over a wall. If you don't throw it high enough, it will never make it over to the other side. Even if you throw the ball a thousand times, you will always fail. The same applies to laser derusting. You can shoot the laser beam a thousand times but as long as the energy is below the ablation threshold of the material you’re working with, nothing will ever be removed. Let's continue with our analogy. Imagine there was a second, higher wall behind the first one and that a ball was thrown with just enough energy to make it over the first wall, but not enough to make it over the second. The ball would bounce off the second wall and fall in between the two walls. Once again, no matter how many times you throw the ball, you will always get the same result. You will make it past the first wall but never the second.

It is a "green" cleaning method. It does not need any chemical reagent and cleaning liquid. The waste cleaned is basically solid powder. It is small, easy to store and recycle, and can easily solve the environmental pollution caused by chemical cleaning. More recently, HD Hyundai participated in the Fort Lauderdale International Boat Show, to demo its NeuBoat level 2 autonomous navigation system for recreational boats. The name mashes together the words "neuron" and "boat" and is quite fitting since the Avikus' A.I. navigation tech is a core component of the solution, it will handle self-recognition, real-time decisions, and controls when on the water. Of course, there are a lot of things happening behind the scenes with HD Hyundai's autonomous navigation solution, which we'll dive into below -- HD Hyundai will also be introducing more about the tech at CES 2023. Traditional industrial cleaning methods are often seen as tedious (and for good reasons). Rust removal can be time and labor consuming. Oxide removal may involve hazardous chemicals specific to each material that needs to be removed. In some cases, paint removal by sandblasting can damage the metal underneath. CW fiber laser cleaning machine uses handheld clean head with continuous laser source. The advantage of CW cleaning machine is high cost performance. If you have low requirements for laser cleaning and only remove rust or thin paint of stainless steel, mild steel and iron, the cost effective CW laser cleaning machine can meet the requirements.

Benefits of Laser Cleaning Machines

On top of this, lasers use no chemical products or solvents. This makes laser surface cleaning one of the safest solutions when it comes to rust and coating removal. Not only is there no chemical waste to take care of, but employees are totally safe when working near laser cleaning machines, which are designed to meet international laser safety standards. Employees won't need personal protective equipment and won't have to handle those pesky chemicals. Laser cleaning can be used for most coating removal and paint stripping applications. The depainting process is perfectly accurate, leaving the base material intact. The same laser can also be used to perform laser marking. With such a wide range of industrial use, let’s look at the features that make the Raycus 50W such a powerful rust remover. The DIHORSE 50W Hand-held Laser Cleaning Machine Features Power Laser + liquid film method, that is, first deposit a layer of liquid film on the surface of the substrate, and then use laser radiation to decontaminate.