value_template: "{{ ((states('sensor.shelly_loft_ovenandpump_real_power')|float ** 2) + (states('sensor.shelly_loft_ovenandpump_reactive_power')|float ** 2))|sqrt|round(2) }}" Auto off: After turning on, the relay output will be automatically turned off after a predefined time (in seconds).

Shelly EM - Shelly UK

If you can’t find the CoIoT peer settings in the device’s web panel, it’s probably using an ancient firmware version, and you should update it to the current one. For generation 2 hardware it’s possible to select if a device’s input is connected to a button or a switch. Binary sensors are created only if the input mode is set to switch. When the input is of type button you need to use events for your automations. Event entities (generation 1) value_template: "{{ ((states('sensor.shelly_loft_workbench_real_power')|float) / (states('sensor.shelly_loft_workbench_apparent_power')|float))|round(2) }}"If the Input Mode of the switch connected to the device is set to Button, the integration creates an event entity for this switch. You can use this entity in your automations. Events Generation 1 “Shelly 4Pro” and “Shelly Sense” are not supported (devices based on old CoAP v1 protocol) If Shelly devices are in a different subnet than the Home Assistant server, you should ensure communication on UDP port 5683 between these subnets.

Shelly EM - Shelly USA

If Home Assistant is running as a virtual machine or service on an operating system other than Home Assistant OS, you should open UDP port 5683 on the device’s firewall and/or ensure that communication from this port is redirected to the Home Assistant service. The first will allow specifying a temperature, the second instead of a percentage of the valve position. Observe a chart with the Shelly Device consumption displayed in Watt-hours (Wh). Above the consumption chart, you can select the time interval and the date from which you want data to be shown.

Customer reviews

Observe a chart with the Shelly Device maximum and minimum voltage displayed in Volts (V). Above the voltage chart, you can select the time interval and the date from which you want data to be shown. On the Home Assistant user interface, I added a new tab for the loft power sensors and added each sensor with the following code: type: entities The integration uses the following strategy to name its entities if the device has more than one relay: value_template: "{{ ((states('sensor.shelly_loft_ovenandpump_apparent_power')|float) / (states('sensor.shelly_loft_ovenandpump_line_voltage')|float))|round(2) }}"

Shelly EM Device Smart Control

Yellow light if in STA mode, and connected to a Wi-Fi network. Not connected to Shelly Cloud or Shelly Cloud disabled. Shelly generation 2 devices running firmware 0.12 or later can act as a Bluetooth proxy for advertisements. Active or passive listening can be enabled in the options flow. Options Earlier this month, we added a Sonoff POW R2 smart switch with power monitoring to our washing machine to enable power logging in Home Assistant and to add notifications when a wash has finished. Always be notified and monitor your power consumption with Shelly EM, so your power counter never cuts-out your electricity. Change the current device name. This will reflect on the device name in the application if the “Sync name” application setting is enabled. Channel nameIf Channel Name is set to the default value, the integration will use the Device ID and default channel name to generate the entities’ name, e.g. ShellyPro4PM-9808D1D8B912 switch_0. We have a small fuse box with two RCBO (Residual Current Breaker with Over-Current) breakers which power the reflow oven and solar thermal pump on one RCBO and the workbench, air compressor and computers on the second RCBO.