Reciprocating Saws: Versatile and easy to use handheld power tools for freehand cutting of metal and plastic pipes. Hydraulic Pipe Cutters: Professional pipe cutters for large steel pipes, available in a range of sizes, including 200mm and 300mm. Features a chain which wraps around the pipe and is tightened, causing the pipe to cut cleanly in two. Creating Rocker Pipes: Short lengths of pipe (commonly 600mm) which are used to allow for different settlement between a structure such as a house wall or manhole and the rest of the drainage scheme. I'll make something one of the days but as this is my first weekend off in ages it's not high on Mrs Eckerslike's list of priorities - or mine actually.

Electric Pipe Saws: We have a range of professional electric pipe saws, including Rems Cento pipe cutters, Exact PipeCut circular pipe saws and orbital pipe cutters available for hire. While more time-consuming, marking the pipe before cutting and cutting by hand usually gets a cleaner and safer cut. A risk assessment and method statement should be carried out by a trained person before commencing work.Our range includes chop saws, reciprocating saws, circular pipe saws and orbital pipe cutters, soil pipe cutters, hydraulic pipe cutters and more. When the pipe is cut skew or left with a jagged edge, it makes it difficult to connect the fitting and risks damaging the seal on the connection. In January 2023, DEFRA published a report that confirmed they will be introducing mandatory sustainable drainage systems (SUDs) policies for all new developments in England.

This makes it easier to attach a drainage fitting and reduces the risk of damaging the seal connectors in the fitting. So, what are the best practices for this common task and what tools can be used to make things easier? Drill attachment: (image below) more expensive than a file, these attachments create a chamfer much more quickly than a file, however, you do have to have a drill and think about charging batteries.

I've seen a device used on site before which was a sort of cross between a pipe threading stand and a rotary apple peeler.

Drainfast, Vision, Frost, SITE STAK, SITESTAK, The SiteStak System and MuckStopper are trademarks of Drainfast Ltd. Some tools commonly used to cut drainage pipes are hand saws and hack saws, and although not recommended on safety grounds, disc cutters are sometimes used. If you, as the hirer, refuel any equipment while it is in your possession, it must be with WHITE DIESEL. Disc cutters and angle grinders are also sometimes used to chamfer pipe, although safety can be a concern.An extensive range of pipe cutters for cutting various pipe materials and thicknesses, including pipe cutting kits. Used extensively for both sewage and grey water, while hidden from view pipe runs serve an incredibly important role in our daily lives. I've often thought that there must be a way of mounting a blade (Stanley knife or similar) in a hand held device that slots over the cut edge of a plastic pipe which you then rotate within the gadget. To mark a straight cut I usually use a length of paper/card and wrap around the pipe, joining up the ends.

Pipe cutting tools are generally used by plumbers and enable a clean cut whilst being faster and cleaner than using a hacksaw, although how clean the cut is will depend on the material of the pipe. Most tube cutters comprise of a grasping device and three sharp edged wheels forced inward by screw pressure that cut into the pipe as the tool is rotated by hand. Chop Saws: Handy tabletop saws for cutting through copper and steel pipes, rods, conduit, box sections and more. When done correctly, the simple addition of some pipe lubricant leaves you ready to push fit the desired fitting, and the job is done.This is to ensure that new development doesn’t come at the cost of safe, sustainable and habitable environments.